Cisco ISE Clustering (Identity Services Engine)
Step1: Convert the first Standalone ISE node to Primary Admin Node Step2: Adjust the Services Step3: Wait approximatley 10-15 minutes while the Application
[...]
Network
Cisco, Arista, HP
Cisco Nexus 9K NX-OS 7 basic setup ssh snmp oob ntp
Cisco Nexus 9000 – NX OS 7 basic setup for out of band network, ssh and snmp conf t enter into configuration
[...]
Enable SSH Cisco IOS
Requirements: Device is available on the network, IP address is assigned for one of it’s interface: link conf t enter into configuration mode
[...]
hpna 10 install on linux – HP Network Automation
HP Network Automation 10 install on Linux Requirements: License that you can get from HP, for example trial: HPNA trial Get the Linux installer:
[...]
Raspberry PI 3 mini Data Center Cloud
First six node Raspberry PI 3 mini data center cloud Computing power: 24 Cores 6 Gigs of RAM Bill Of Material Component PCs
[...]
cisco setup layer3 interface ip address
conf t enter into configuration mode sh ip int br list available interfaces interface FastEthernet0/1 enter into interface configuration ip address 192.168.2.51
[...]
Arista vEOS ethernet port to L3
Activate Arista vEOS appliance virtual Ethernet port(s) to Layer3 mode conf t enter into configuration mode int Ethernet1 enter into port configuration
[...]
Create a new Unetlab template
An example howto create a new Unetlab Ubuntu template: Re-use an existing template Go to /opt/unetlab/html/templates/ and find any of the template which is
[...]
Cisco 3550 EMI Layer3 firmware upgrade
Cisco 3550 firmware upgrade to EMI Layer3 IP Services Cisco 3550 hardware is capable of running the following Layer2 – IP Base /
[...]
Cisco 2811 Router IOS 15 firmware upgrade
Cisco 2811 Router IOS 15 firmware upgrade Select the appropriate IOS 15 version according to your CF card size and memory option: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-packaging/product_bulletin_c25-557281.html
[...]