Cisco ISE Clustering (Identity Services Engine)
Step1: Convert the first Standalone ISE node to Primary Admin Node Step2: Adjust the Services Step3: Wait approximatley 10-15 minutes while the Application
[...]
Cisco
Cisco Nexus 9K NX-OS 7 basic setup ssh snmp oob ntp
Cisco Nexus 9000 – NX OS 7 basic setup for out of band network, ssh and snmp conf t enter into configuration
[...]
Enable SSH Cisco IOS
Requirements: Device is available on the network, IP address is assigned for one of it’s interface: link conf t enter into configuration mode
[...]
Raspberry PI 3 mini Data Center Cloud
First six node Raspberry PI 3 mini data center cloud Computing power: 24 Cores 6 Gigs of RAM Bill Of Material Component PCs
[...]
cisco setup layer3 interface ip address
conf t enter into configuration mode sh ip int br list available interfaces interface FastEthernet0/1 enter into interface configuration ip address 192.168.2.51
[...]
Cisco 3550 EMI Layer3 firmware upgrade
Cisco 3550 firmware upgrade to EMI Layer3 IP Services Cisco 3550 hardware is capable of running the following Layer2 – IP Base /
[...]
Cisco catalyst 2960 layer3 activation
Activate layer 3 functions on Cisco Catalyst 2960 series switch Requirement: at least Cisco IOS Software Release 12.2(55) lanbase firmware edition is needed
[...]
Cisco upgrade IOS TFTP
Upgrade IOS TFTP Prerequisite: in case of Layer2/Layer3 switch device you will need to setup first an Interface VLAN for being able to
[...]
Cisco save running configuration
Save running configuration copy running tftp You will need to provide the name of the configuration file to save. Also you will need
[...]
Cisco IOS SNMP setup v2 and v3
SNMP setup conf t enter into configuration mode snmp-server community snmpitminutes ro enable SNMP v2 snmp-server user snmpuser PRIVGROUP v3 auth md5 authpassword priv 3des certificationpassword
[...]