DIY Guide of building a DSLR capable Hexacopter for Cinematic recording

Bill of material:

Frame:
Tarot T960 foldable carbon frame
http://www.helipal.com/tarot-t960-hexacopter-frame-set.html

Flight Controller:
DJI Naza V2:
https://www.dji.com/naza-m-v2

OSD:
DJI iOSD mini
https://www.dji.com/iosd-mini

Telemetry:
DJI DataLink Ground Station
https://www.dji.com/2-4g-bluetooth-datalink

Battery:
6S 10.000mah Turnigy Graphene
https://hobbyking.com/en_us/turnigy-graphene-10000mah-6s-15c-w-5-5mm-bullet-connector.html

Charger:
Turnigy Reaktor 300W
https://hobbyking.com/en_us/turnigy-reaktor-300w-20a-6s-balance-charger.html

Motors:
Tarot 5008/340KV 6x
http://www.helipal.com/tarot-5008-high-power-brushless-motor-340kv.html

Props:
17×5.5 Carbon Rctimer (3 pairs of CW and CCW)
http://rctimer.com/product-1231.html

ESC:
40Amps SimonK ESC
http://rctimer.com/product-850.html

Camera:
Sony Nex5

Gimbal:
RCTimer Nex with Alexmos 8bit controller
http://rctimer.com/product-980.html

RC transmitter and Receiver:
FR Sky II Plus and Telemetry

RC controller of Copter:
Turnigy 9x with customized ER firmware
https://hobbyking.com/en_us/turnigy-9x-9ch-transmitter-w-module-8ch-receiver-mode-2-v2-firmware.html

RC controller of Gimbal:
Turnigy tgy i6
https://hobbyking.com/en_us/turnigy-tgy-i6-afhds-transmitter-and-6ch-receiver-mode-2.html

Landing Gears:
Electric Retractable landing gears 16-20mm:
https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20161214013504&SearchText=retractable+landing+gear

FPV transmitter:
Boscam 353 400mW 5.8GHZ 8CH
http://www.banggood.com/FPV-5_8G-400mW-AV-Transmitter-Module-TS353-p-73439.html

FPV monitor:
Feelworld 10″ HD 32ch diversity
http://www.banggood.com/Feelworld-PVR1032-FPV-5_8G-10_1in-Monitor-Built-in-Dual-32CH-Receiver-p-957744.html

Share with: