Cisco ISE Clustering (Identity Services Engine)
Step1: Convert the first Standalone ISE node to Primary Admin Node Step2: Adjust the Services Step3: Wait approximatley 10-15 minutes while the Application
[...]
Cisco
switching, routing commands and howto-s
Cisco Nexus 9K NX-OS 7 basic setup ssh snmp oob ntp
Cisco Nexus 9000 – NX OS 7 basic setup for out of band network, ssh and snmp conf t enter into configuration
[...]
Enable SSH Cisco IOS
Requirements: Device is available on the network, IP address is assigned for one of it’s interface: link conf t enter into configuration mode
[...]
Raspberry PI 3 mini Data Center Cloud
First six node Raspberry PI 3 mini data center cloud Computing power: 24 Cores 6 Gigs of RAM Bill Of Material Component PCs
[...]
cisco setup layer3 interface ip address
conf t enter into configuration mode sh ip int br list available interfaces interface FastEthernet0/1 enter into interface configuration ip address 192.168.2.51
[...]
Cisco 3550 EMI Layer3 firmware upgrade
Cisco 3550 firmware upgrade to EMI Layer3 IP Services Cisco 3550 hardware is capable of running the following Layer2 – IP Base /
[...]
Cisco 2811 Router IOS 15 firmware upgrade
Cisco 2811 Router IOS 15 firmware upgrade Select the appropriate IOS 15 version according to your CF card size and memory option: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-packaging/product_bulletin_c25-557281.html
[...]
Cisco erase IOS configuration
Erase IOS configuration files delete flash:vlan.dat delete vlan information, you will have to confirm write erase erase the IOS configuration reload reboot the IOS
[...]
Cisco catalyst 2960 layer3 activation
Activate layer 3 functions on Cisco Catalyst 2960 series switch Requirement: at least Cisco IOS Software Release 12.2(55) lanbase firmware edition is needed
[...]
Cisco upgrade IOS TFTP
Upgrade IOS TFTP Prerequisite: in case of Layer2/Layer3 switch device you will need to setup first an Interface VLAN for being able to
[...]